Electronics travel safely when they stay in their original cartons on a solid pallet, ride in a closed, dry vehicle and, ideally, go direct without transhipment. For valuable shipments a seal and full-value insurance are worth adding, because the carrier's basic CMR liability rarely covers what electronics are actually worth.
How do you pack electronics against shocks?
Most damage happens not on the road but during loading, unloading and handling at depots. What matters most is that the pallet behaves as one solid unit.
- Keep devices in their original cartons with moulded inserts. Loose units without padding slide around every time the driver brakes.
- Heavy cartons go at the bottom, light ones on top, stacked in an interlocking pattern like bricks.
- Nothing should overhang the pallet edge — a protruding corner is the first thing a fork or the neighbouring pallet hits.
- Stretch-wrap from the bottom deck upwards, fit edge protectors and lay a cover sheet on top. Tilt and shock indicators show later whether the pallet was mishandled.
- Mark the shipment “fragile”, “keep dry” and with “this way up” arrows. If nothing may be placed on it, write “do not stack” clearly on the film.
The general method for palletised freight is explained in How to prepare pallets for transport.
Which vehicle suits which shipment?
| Shipment | Suitable vehicle | Keep in mind |
|---|---|---|
| 1–3 pallets, urgent | box van up to 3.5 t | low payload, travels alone with no transhipment |
| up to about 15 pallets | 7.5 t truck or rigid, often with tail lift | good for delivery without a dock, e.g. to a shop |
| full load | 13.6 m semi-trailer, curtain or box | 33 euro pallets, can be sealed, goes direct |
| temperature-sensitive | temperature-controlled vehicle | state the required range in advance |
A box body or a tightly closed curtain-sider works well for electronics. For particularly shock-sensitive goods you can ask for a vehicle with air suspension. With smaller volumes the question is groupage or a dedicated vehicle — see FTL vs LTL for the trade-offs. Every transhipment at a depot means extra handling, so valuable goods are better sent direct.
Why do moisture and temperature changes matter?
When cold goods enter a warm building, condensation forms — in winter even inside the carton. After unloading, let electronics acclimatise for a few hours before unpacking and switching them on. In frost or summer heat a temperature-controlled vehicle is the safer choice; how that works is described in Refrigerated transport. Desiccant sachets inside the cartons and film that closes the pallet on top also help.
How do liability and insurance work?
In international road haulage the carrier's liability under the CMR Convention is capped at 8.33 SDR per kilogram of gross weight. For light, expensive electronics that is often a small fraction of the real value. Put the value of the goods in your enquiry so we can arrange additional full-value cover. Piece count, seal number and any reservations belong on the consignment note — see CMR consignment note.
What should you check at loading and delivery?
- The number of pallets and cartons matches the delivery note or serial number list.
- Film, edge protectors and cover sheet are intact and nothing overhangs.
- The seal number is written on the CMR and still matches on arrival.
- Visible damage is noted on the CMR before signing, and photographed.
- Concealed damage is reported in writing as soon as it is found after unpacking.
What are the most common mistakes?
- The weight is only guessed, and the van booked for it turns out too small.
- Nobody says whether pallets can be stacked, and a heavy pallet ends up on top of monitors.
- The value of the goods is missing from the enquiry, so insurance is discussed too late.
- The delivery site has no dock or forklift, and nobody mentioned it beforehand.
How do you request an electronics transport?
Send us the loading and delivery locations, the number of pallets with dimensions and weight, whether they are stackable, the value of the goods and your vehicle needs (box body, seal, temperature, tail lift). The online calculator gives an indicative price; during office hours you receive a binding quote within 30 minutes, and we usually arrange a vehicle within 24 hours.
Related services: Pallet transport · Express transport